Blodgett BLP-40G Manuale Utente

1 BLP-G GAS FLOOR MODEL BRAISING PAN WITH ELECTRIC POWER TILT INSTALLATION – OPERATION – MAINTENANCE BLODGETT OVEN

10 TILTING THE BRAISING PAN 1. DO NOT try to tilt braising pan with lid down. 2. Make sure the receiving pan is in place. 3. To tilt braising p

11 4.0 PERIODIC MAINTENANCE WARNING: Disconnect the power supply to the appliance before cleaning or servicing. CLEANING After each use, allow

12 CAUTION: The appliance and its parts are hot. Use care when operating, cleaning and servicing the appliance. ADJUSTMENTS All tilting braising

13 5.0 COOKING GUIDELINES The guidelines given below are suggested quantities, temperature settings, and estimated numbers of orders per load and p

14 ITEM PORTION TEMP (F) BATCH/HR BLP-30G PER LOAD QTY PORTIONS BLP-40G PER LOAD QTY PORTIONS SAUCES, GRAVIES, SOUPS Brown Gravy

15 ITEM PORTION TEMP (F) BATCH/HR BLP-30G PER LOAD QTY PORTIONS BLP-40G PER LOAD QTY PORTIONS DESSERTS, PUDDINGS, SWEET SAUCES Bu

16 ITEM PORTION TEMP (F) BATCH/HR BLP-30G PER LOAD QTY PORTIONS BLP-40G PER LOAD QTY PORTIONS MEAT-POULTRY (continued) TURKEY Off

17 6.0 TROUBLESHOOTING Burners do not come on: 1. Gas supply to unit is “OFF”. 2. Manual shut off valve is “OFF”. 3. Thermostat is not turned

2 IMPORTANT NOTES FOR INSTALLATION AND OPERATION It is recommended that this manual be read thoroughly and that all instructions be followed careful

3 TABLE OF CONTENTS DESCRIPTION PAGE Important Notes for Installation and Operation ...

4 1.0 SERVICE CONNECTIONS 1.0 [26]29.5 [750]6[152] MINIMUM23.5 [597]OPTIONAL FAUCETPOUR PATHCA33[838]37[940]HH KH4.0 [101]7.0 [178]LMB19.25[489]DE

5 2.0 INSTALLATION INSTRUCTIONS UNPACKING Immediately after unpacking, check for possible shipping damage. If the tilting braising pan is found t

6 Ventilation must be provided in accordance with local codes, or in the absence of local codes, with ANSI/NFPA 96 Standard for Ventilation and Fire

7 GAS CONNECTIONS All gas supply connections and any pipe joint compound used must be resistant to the action of propane gases. The gas inlet is

8 3.0 OPERATION INSTRUCTIONS BEFORE FIRST USE CAUTION: Do not attempt to operate this unit in the event of a power failure. Using a non-corros

9 START-UP PROCEDURE 1. Open manual gas shutoff valve. 2. Ensure that the braising pan is in the DOWN position. 3. Turn on power switch. 4. Tu